Plumbing and water treatment across Las Vegas and Clark County(725) 257-2386
Las VegasPlumbing Call Now (725) 257-2386

Las Vegas and Clark County

Faucet Installation in Las Vegas

Swapping a faucet is a small job that goes wrong in one predictable way: the shutoff valve under the sink has not been turned in fifteen years and will not close.

Talk to a plumber

Describe the symptom and where you are in the valley. We will tell you what it usually means and what it takes to fix before anyone comes out.

Call Now (725) 257-2386

Serving Las Vegas and Clark County.

Worth having ready

  • Which fixtures are affected, and whether anything else behaves differently
  • When it started, and whether it is getting worse
  • Roughly how old the house is, which narrows the likely pipe material

Faucet installation covers removing the old unit, fitting the new one, and connecting supply lines. The part worth planning for is the supply stops, which frequently fail when they are operated for the first time in years.

Diagnosis before a quote, so you are not paying to replace the wrong part
Scope and price in writing before work starts, exclusions included
Repair and replace options priced together, with the reasoning
Local water facts cited to the Las Vegas Valley Water District, so you can check them

Symptoms

Reasons people replace a faucet

  • Parts for the existing faucet are no longer produced
  • The body is worn where the cartridge seats
  • Repeated repairs are approaching the cost of a new unit
  • A kitchen or bathroom update
  • Wanting a pull down sprayer or a different hole configuration
  • Accessibility needs that call for a lever handle

Scope

What installation covers

What is included

  • Removal and disposal of the old faucet
  • Fitting the new faucet, including deck plate or escutcheon where needed
  • New flexible supply lines
  • Supply stop replacement where existing valves are seized or weeping
  • Sprayer, soap dispenser and air gap connection where fitted
  • Leak testing under pressure at every connection

What is not included

  • Cutting new holes in stone or solid surface countertops
  • Sink replacement, which is a separate job
  • Supplying the faucet, unless that is agreed in advance

Process

How an installation runs

1

Check hole count and spacing

A three hole sink and a single hole faucet need a deck plate. Confirming this before the box is opened avoids a wasted visit.

2

Test the stops

Before anything is disconnected. A stop that will not close changes the job, and it is better to find out at the start.

3

Remove the old unit

Usually the fiddliest part, because the fixing nuts sit in the least accessible place in the house.

4

Fit and connect

New faucet set and sealed, new flexible supplies fitted, stops replaced where needed.

5

Pressure test and check underneath

Run both temperatures, then check every joint under the sink with the cabinet dry, because a slow weep is invisible for weeks.

The supply stop problem

Under every sink are two small valves that nobody touches between plumbing jobs. Sitting unused for years, and in hard water, they seize or fail to seal when finally operated.

When that happens during a faucet swap, the water has to be shut off at the house, and the job now includes replacing the stops. It is a small extra cost and it is worth expecting rather than being surprised by.

It is also a genuine improvement: working stops mean the next repair at that fixture does not involve shutting down the whole house.

Buy for the cartridge, not the finish

The finish is what you look at, and the cartridge is what determines how long you go without calling anyone. A faucet from a line with widely available replacement cartridges is repairable in a decade. A cheap unit with a proprietary part often is not.

That matters more in this valley than most, because hard water works cartridges harder and you are statistically more likely to need one.

On pricing: we have not published price ranges on this site, because a range we cannot stand behind is worse than no range. Scope and price go in writing before any work starts.

Straight answers

Fair questions about this work

Can I supply my own faucet?

Yes, and many people do. Let us know the model in advance so any adapters or deck plates are on the van.

Will you have to shut off the whole house?

Only if the supply stops will not close, which is common on older installations. They get tested first.

Does a new faucet fix low pressure?

Only if the old aerator or cartridge was the restriction. If the low pressure is house wide, a new faucet changes nothing.

Coverage

Faucet Installation across the valley

We cover faucet installation throughout the Las Vegas Valley and Clark County.

Las Vegas

Downtown, the Arts District and the historic central valley, where galvanised supply still turns up.

Las Vegas service area

North Las Vegas

Aliante and Eldorado newer builds against a wartime era core with very different plumbing.

North Las Vegas service area

Henderson

Green Valley, Anthem and Inspirada, plus the original townsite with very different needs.

Henderson service area

Boulder City

The oldest housing in Southern Nevada, built for Hoover Dam workers in the early 1930s.

Boulder City service area

Paradise

The Strip corridor, UNLV and Paradise Palms. Dense, mixed use and mid century in parts.

Paradise service area

Spring Valley

Chinatown corridor, Peccole Ranch and Rhodes Ranch. 1980s to 2000s, and lots of restaurants.

Spring Valley service area

FAQ

Faucet Installation questions

How long does faucet installation take?

A straightforward swap is short. Seized supply stops, an awkward sink or a change in hole configuration are the three things that extend it.

What if my shutoff valve does not work?

It gets replaced as part of the job. That means shutting off the water at the house briefly, and it leaves you with working stops for next time.

Can I install a single hole faucet on a three hole sink?

Yes, with a deck plate that covers the unused holes. Confirming the hole count before purchase avoids a wasted trip.

Do you supply the faucet?

We can, or you can supply your own. Tell us the model in advance so the right adapters come with us.

Related

Related services and guides

Faucet Repair

Drips, stiff handles and lost pressure, usually a cartridge and usually scale.

More on faucet repair

Plumbing Fixture Installation

Sinks, tubs, showers, bidets and pot fillers, set and connected properly.

Plumbing Fixture Installation details

Toilet Installation

New toilets set on a sound flange with a fresh seal, old unit hauled away.

Toilet Installation in Las Vegas

Residential Plumbing

Houses, condos and townhomes across the valley, from a single tap to a whole repipe.

Residential Plumbing details

View all services or Browse the areas we serve.

Need faucet installation in the valley?

Describe the symptom and we will tell you what it usually means and what it takes to fix.

Call (725) 257-2386