Las Vegas and Clark County

Toilet Installation in Las Vegas

A toilet installation is judged entirely by what is underneath it. A new pan set on a damaged flange will leak, and it will leak into the floor rather than onto it.

Call Now (725) 257-2386 What to have ready

Talk to a plumber

Describe the symptom and where you are in the valley. We will tell you what it usually means and what it takes to fix before anyone comes out.

Call Now (725) 257-2386

Serving Las Vegas and Clark County.

Worth having ready

Which fixtures are affected, and whether anything else behaves differently
When it started, and whether it is getting worse
Roughly how old the house is, which narrows the likely pipe material

Toilet installation covers removing the old unit, checking the flange and subfloor, and setting the new toilet on a fresh seal. Rough in distance decides which toilets will fit, and it is measured before anything is bought.

Diagnosis before a quote, so you are not paying to replace the wrong part

Scope and price in writing before work starts, exclusions included

Repair and replace options priced together, with the reasoning

Local water facts cited to the Las Vegas Valley Water District, so you can check them

Symptoms

Reasons to replace

A cracked pan or tank, which cannot be repaired reliably
Repeated repairs adding up to more than a replacement
A toilet that has never flushed properly by design
Wanting a comfort height or higher efficiency unit
A bathroom remodel
A wobbling pan on a flange that has failed

Scope

What installation covers

What is included

Rough in measurement before purchase
Removal and disposal of the old toilet
Flange inspection, and repair where it is damaged or below floor level
New wax or compression seal and new closet bolts
Setting, levelling and securing the pan
New supply connector and stop where needed
Testing across a full flush cycle and checking for movement

What is not included

Subfloor replacement where previous leaking has caused damage
Tiling and flooring work around the new footprint
Moving the drain location, which is a much larger job

Process

How a toilet gets set

Measure the rough in

Wall to the centre of the closet bolts. It decides which toilets fit, and it is measured before anything is ordered.

Lift and inspect

With the old unit out, the flange and the floor around it are visible. This is when previous slow leaks get discovered.

Correct the flange

A cracked flange or one sitting below finished floor level has to be corrected. Setting a new toilet on a bad flange guarantees a callback.

Set on a fresh seal

New seal, new bolts, pan set square, levelled and secured without overtightening, which is how pans crack.

Test and check for rock

Full flush cycle, connections checked dry, and the pan checked for any movement before we leave.

Rough in is the measurement that matters

Rough in is the distance from the finished wall to the centre of the closet bolts, and it decides which toilets will physically fit. Most homes use one common dimension, but not all do, and older properties are where the surprises live.

Measuring first takes a minute. Discovering it after the box is open means a return trip and a bathroom out of service in the meantime.

The flange is the whole job

The closet flange anchors the toilet and forms the seal to the drain. Flanges crack, corrode, and sit too low once new flooring has been laid over the old.

Any of those means the new toilet will not seal properly, and the leak goes under the pan into the subfloor. Correcting the flange during the installation is far cheaper than discovering it through a damaged floor.

This is also the moment to look at the subfloor. If an old toilet has been leaking slowly, the evidence is right there, and it is better found now.

Choosing a toilet worth installing

Flush performance varies a lot more than price does. A well designed unit clears reliably on less water, which matters in a valley where water use is taken seriously.

Comfort height suits many households, and replacement parts availability is worth checking, particularly here where hard water means you will eventually replace a flapper or a fill valve.

On pricing: we have not published price ranges on this site, because a range we cannot stand behind is worse than no range. Scope and price go in writing before any work starts.

Straight answers

Fair questions about this work

Can I install a toilet myself?

People do. The two things that catch them out are a flange that needs correcting and overtightening the bolts, which cracks the pan.

Do you take the old toilet away?

Yes, removal and disposal are part of the job.

Will a new toilet fix my slow drain?

No. If the drain is slow, the blockage is downstream and a new toilet will behave the same way.

Coverage

Toilet Installation across the valley

We cover toilet installation throughout the Las Vegas Valley and Clark County.

Las Vegas

Downtown, the Arts District and the historic central valley, where galvanised supply still turns up.

See Las Vegas

North Las Vegas

Aliante and Eldorado newer builds against a wartime era core with very different plumbing.

See North Las Vegas

Henderson

Green Valley, Anthem and Inspirada, plus the original townsite with very different needs.

See Henderson

Boulder City

The oldest housing in Southern Nevada, built for Hoover Dam workers in the early 1930s.

See Boulder City

Paradise

The Strip corridor, UNLV and Paradise Palms. Dense, mixed use and mid century in parts.

See Paradise

Spring Valley

Chinatown corridor, Peccole Ranch and Rhodes Ranch. 1980s to 2000s, and lots of restaurants.

See Spring Valley

FAQ

Toilet Installation questions

What is toilet rough in and why does it matter?

It is the distance from the finished wall to the centre of the closet bolts, and it determines which toilets fit. It is measured before purchase to avoid a return trip.

Do I need a new wax seal?

Always, whenever a toilet is lifted. A used seal will not reseal reliably, and the resulting leak goes into the subfloor rather than onto the floor.

How do I know if my flange is damaged?

It is inspected once the old toilet is lifted. Cracking, corrosion and a flange sitting below finished floor level are the three common problems, and all are corrected before setting the new unit.

Do you dispose of the old toilet?

Yes, removal and disposal are included.

Toilet Repair

Running, weak flushing, rocking or leaking at the base, each a different fault.

Plumbing Fixture Installation

Sinks, tubs, showers, bidets and pot fillers, set and connected properly.

Plumbing Fixture Installation services

Faucet Installation

New kitchen and bath faucets fitted, including the stops nobody thinks about.

Residential Plumbing

Houses, condos and townhomes across the valley, from a single tap to a whole repipe.

See residential plumbing

See what we handle or Find your part of the valley.

Need toilet installation in the valley?

Describe the symptom and we will tell you what it usually means and what it takes to fix.

Call Now (725) 257-2386 Contact details